Qpl 81706 PDF

QUALIFICATIONS CERTIFIED QPL-81706-16 SEPTEMBER 2001 ...

AMSC N/A 1 of 7 AREA MFFP DISTRIBUTION STATEMENT A . Approved for public release; distribution is unlimited. QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION

QPL-81706-16 QUALIFICATIONS CERTIFIED AMENDMENT-2 SEPTEMBER ...

qualified products list of products qualified under detail specification mil-dtl-81706 chemical conversion materials for coating aluminum and aluminum alloys

Henkel QPl-81706 APProved Conversion CoAtings

Henkel QPl-81706 APProved Conversion CoAtings for the Aerospace Industry All products listed below can be used to meet requirements of Mil-DTL 5541, which calls out the

SENSITIVE MIL-DTL-5541F MIL-C-5541E CHEMICAL CONVERSION ...

material can be listed on QPL-81706 for both classes. Because class 3 coatings are thinner they are more susceptible to corrosion than class 1A coatings. If it is required to paint areas surrounding electrical contacts, class 3 coatings improve adhesion of paint systems on aluminum

ChromitAL TCP SurTec 650 (MIL-DTL-81706 QPL approved)

ChromitAL TCP "SurTec 650" (MIL-DTL-81706 QPL approved) ChromitAL TCP "SurTec 650" is a passivation for aluminum, aluminum alloys or aluminum die

Technical Process Bulletin

ALODINE 600 coating chemical, being listed on the Qualified Product List QPL-81706, is an approved material for use by Method B (brush processing) to produce Class 1A and 3 coatings, bare or painted in accordance with Military Specification MIL-C-5541E (A through E).

Alodine 1200S MP0116 Final

C5541/QPL-C-81706 and Boeing Spec. BAC 5719. BENEFITS: A very rapid non-electrolytic chromate conversion treatment. Produces attractive golden coatings on all aluminium surfaces. Excellent corrosion protection with or without paint.

SURFACE TREATMENTS

Listed on the register for QPL-MIL-C-81706 and is approved to be used by Methods A and C (spray and immersion processing) to produce class 3 coatings in accordance with Military Specification MIL-C-5541 (current issue).

Evaluation of Alternative Cr Surface Treatments - ASETSDefense

• All 5 QPL 81706 TCP Formulas Applied with a Mild Boeing Cleaner and Mild Deox (No Etch) – All 5 Passed Coating Weight, Contact Resistance, Paint Adhesion, and Scribed Paint Corrosion Salt Spray with Chromated Primers

Alodine 1200 S - Adhesives Distributor, Dow Corning ...

in the Qualified Product List QPL-81706 as approved materials for other Methods and Classes of Military Specification MIL-C-5541 B. Coating bath make-up: For 1000 l volume of bath, add to the water with stirring or circulating by the pump:

Corrosion Performance of Field-Applied Chromate Conversion ...

MIL-C-81706 (QPL-81706), a product must perform at the qualification level. The quality conformance requirements are used mainly for quality control and lot inspection. On the other hand, MIL-C-5541 is a “process” specification and defines the characteris-

Paint Shop Products Catalog Conversion Coatings

QPL-MIL-C-81706 approved to produce Class 1A & Class 3 coatings in accordance with MIL-C-5541 598427 10 Pound 592728 60 Pound 596135 5 Gallon RTU (Ready To Use) ALODINE 1201: Liquid, ready to use, non-flammable 594419 Quart 594418 Gallon 594657 ...

TECHNICAL INFORMATION ALODINE 600 - Solvents | Refrigerant ...

Its listing on QPL- 81706-16 indicates its acceptance under MIL-C-5541E. 2. SUMMARY OF OPERATING DATA Coating Bath Make Up For each 1,000 litres of bath, add to the water with stirring ALODINE 600 15 kgs per 1,000 litres of bath * ALODINE Toner 22

MIL-A-8625F Anodic Coatings, for Aluminum and Aluminum Alloys ...

subsequently treated with QPL-81706 materials to provide surface protection. Discoloration on the surface that has been sized is acceptable (see 6.6). The designer is cautioned to require adequate thread and hole sealing

NOT MEASUREMENT SENSITIVE I P41L-A-8625F 10 September 1993 ...

treated with QPL-81706 materials to provide surface protection. Discoloration on the surface that has been sized is acceptable (see 6.6). The designer is cautioned to require adequate thread and hole sealing operations in subsequent

Technical Process Bulletin

Qualified Products List QPL-81706 as approved materials for method A and B application. 2. Operating Summary: Chemical: Bath Preparation per 100 gallons ALODINE 1200S 6.3 pounds Operation and Control: ALODINE Coating Chemical Titration ...

Technical Process Bulletin - Adhesives Distributor, Dow ...

ALODINE 600 is approved under MIL-C-81706 for use by Application Methods A and C, classes 1A and 3: and it's listing on QPL 81706 indicates its acceptance under the MIL-C-5541 document of current issue. 2. Operating Summary:

TCP TechSum 090408print - METALAST- Better for Industry ...

METALAST TCP-HF has been tested against and passed all QPL testing to MIL-DTL-81706-B for immersion applications. (Final approval pending shelf life testing). METALAST TCP-HF can be used as a chromate replacement on bare aluminum, on

DEPARTMENT OF THE NAVY NAVAL AIR SYSTEMS COMMAND RADM WILLIAM ...

Listing on the Qualified Products List (QPL) will appear as indicated below. To ensure correct listing, please advise us within 14 days from the date of this letter of any discrepancy. Manufacturer's Designation Test or Qualification

IN TO 23 471 PATUXENT RIVER, MD 20670- 1547

Technical Process Bulletin - DGR Industrial Products, Inc ...

NOT MEASUREMENT SENSITIVE 10 March 1977 MILITARY ...

MIL-C-81706 AMENDMENT 6 23 October 2000 SUPERSEDING INT. AMENDMENT 5(AS) 13 November 1979 AMENDMENT 4 10 March 1977. MIL-C-81706 AMENDMENT 6 2 * 2.1: Under SPECIFICATIONS, Federal add: ... (QPL), the manufacturer shall verify by certification to the

Technical Process Bulletin - ABLE Aerospace Adhesives

and C, classes 1A and 3: and it's listing on QPL 81706 indicates its acceptance under the MIL-C-5541 document of current issue. 2. Operating Summary: Chemical Bath Preparation per 100 gallons: ALODINE 600 Chemical 12.5 pounds *ALODINE TONER 22 ...

Chromium Alternatives Qualification Testing - DENIX

added to the Qualified Products List (QPL) for MIL-DTL-5541 (QPL-81706) by the time this portion of the testing was complete, it was decided that all four TCP products should continue to the qualifying testing.

Alodine 5700 – Q&A

Rev E) and hence is not listed on the QPL-81706-16. Does Alodine 5700 have any commercial approvals? Boeing Corporation will approve the use of Alodine 5700 on their commercial aircraft. It is

Alodine 5700, PIB, 6-28-04

It is not listed on QPL-81706-16. • Alodine 5700 is available in concentrated form (Alodine 5200) for use in immersion applications. Title: Microsoft Word - Alodine 5700, PIB, 6-28-04.doc Author: Tull_Tom Created Date:

ALODINE 600 - BRUSH APPLICATION

Alodine 600, being listed on the Qualified Product List QPL-81706, is an approved material to be used by Method B (brush processing) to produce Class 3 coatings, bare or painted, in accordance with Military Specification MIL-C-5541E.

MILITARY SPECIFICATION ANODIC COATINGS, FOR ALUMINUM AND ...

treated with QPL-81706 materials to provide surface protection. Discoloration on the surface that has been sized Is acceptable (see 6.6). The designer is cautioned to require adequate thread and hole seallng operations in subsequent

Technical Process Bulletin

ALODINE 1200S coating chemical listed on Qualified Product List QPL-81706, is an approved material to produce Class 1A and Class 3 coatings, bare or painted, in accordance with Military Specifications MIL-DTL-5541. 2. Operating Summary:

Collective Goals DoD Metal Finishing Workshop - ASETSDefense

Performance: Meets Mil-DTL-81706B (QPL)/Mil-DTL-5541F Type II, Class A & B. No hexavalent chrome in product or coating. Alodine ...

CEE-BEE AVIATION PRODUCTS AEROSPACE APPROVAL MANUAL

MIL-C-81706-16, Class 1A and Class 3 Conversion Konverkote #l, Part A 27083 Coating Konverkote #1, Part B 27084 Intex 8007 (QPL ... QPL to MIL-PRF-29602A Super Bee 300LFM 20151 MIL-STD 271F,Fluorescent Wet Method **Met-L-Chek 1400 27130 Magnetic ...

アルミ・アルミ合金用 6 価クロムフリー防錆 ...

～ChromitAL TCP “SurTec 650”（MIL-DTL-81706 QPL 認定薬剤）～ ChromitAL TCP “SurTec 650” ...

TO 1-1-8 - Robins Air Force Base - Home

81706 Solution ..... 3-11 3.1.19 Application of MIL-C-81706/MIL-DTL-81706 Solutions ..... 3-12 3.1.20 ... QPL Qualiﬁed Products List RPM Revolutions per Minute SG Speciﬁc Gravity SLED Shelf-Life Extension Data SM/IM System Manager/Item Manager

1. Contract ID Code Page Of 1 6 AMENDMENT OF SOLICITATION ...

81706 Class 3 or ASTM B 921, Table 1 Standard Specification for Non-Hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys. ... Powder coat primer shall be selected from the qualified products list for MIL-PRF-32348. (b) ...

FOR IMMEDIATE RELEASE - Chemetall - North America

RoHS, ELV, and WEEE standards, meets or exceeds MIL-DTL-81706 and MIL-C-5541 class 1A & 3 requirements, and is QPL-approved. Because hexavalent chromium is a highly toxic carcinogen, the automotive industry has banned its

TURCOAT ACCELAGOLD - Авиационные ...

TURCOAT ACCELAGOLD meets and is qualified to the following MIL- specifications and is QPL listed. 1.MIL-C-81706 - Chemical Conversion Material for Coating Aluminum and Aluminum Alloys. CLASS 1A - For maximum protection against corrosion, painted or unpainted

Non-Chromate Aluminum Pretreatments Phase II Interim Report ...

QPL – Qualified Products List RRAD – Red River Army Depot RH – Relative Humidity ... 5541/SAE AMS-C-5541 and MIL-DTL-81706). Based on extensive laboratory testing and limited field use (on F-16s, T-37s, and T-38s), AFCPCO determined there was not

WARNER ROBINS AIR LOGISTIC CENTER

QPL 8 . Current Specifications 9 MIL-SPEC •MIL-DTL-81706 “Chemical Conversion Materials for Coating Aluminum and Aluminum Alloys ”

ALODINE 1200 - ULM Technologie - Documentations - Accueil

L’Alodine 1200 est homologuée selon la norme MIL C 5541 et figurer sur la liste QPL 81706. Conditions de stockage Stocker le contenant fermé, à l’abri de l’humidité. 2- Caractéristiques Aspect : poudre brun clair

ORGANIC COATINGS LABORATORY REPORT INDUSTRIAL & OPERATIONAL ...

requirements for QPL listing to MIL-PRF-85285D, Type III, Class W. Per SD-6 requirements, ... SURFACE TREATMENT – MIL-DTL-81706, TYPE I, CLASS 1A . SUBSTRATE – AA2024T3 . PRODUCT & CONDITIONS : CLEAN . TURCO 4215 NC LT – 130 F, 15 min . ACTIVATE .

SENSITIVE MIL-PRF-85582D MIL-PRF-85582C - All Categories on ...

MIL-DTL-81706 - Chemical Conversion Materials For Coating Aluminum and Aluminum Alloys MIL-PRF-83282 - Hydraulic Fluid, Fire Resistant, Synthetic Hydrocarbon Base, ... Qualified Products List (QPL), the manufacturer will be required to verify by certification to the

ALUMIBOND 1200

81706, the Qualified Products List for Spec. MIL-C-5541 Class 1A, Form II, Method B & C. ALUMIBOND 1200-Technical Data-Page 2 OPERATING DATA IMMERSION APPLICATION Recommended ALUMIBOND 1200 1 opg (7.5 g/l) Temperature 60 - 100 ° F. (15.6-37.8° C) Time ...

Chem Seal CS 3204 R Technical Bulletin December, 2008 Class A ...

MIL-DTL-81706 . 35 . 100% . 40 ; Paragraph 3.6.20.3 AMSS8802 (7 lbf/ inch – 100% cohesive) after 70 days exposure . Panel; JRF. JRF/SW. Cohesive. AMS-C-27725 . 100% . 40 . Tensile Strength and Elongation . JRF – AMS2629 Type I . Para. Required. Result. Conditioning.

Sargent Controls & Aerospace - Home | sargentaerospace.com

Are materials per MIL-DTL-81706, listed on the QPL, and applied by treatment method for which product was approved? CHEMICAL CONVERSION COATINGS, ALUMINUM. FORM 5.383 20080613 Sargent Controls & Aerospace SPECIAL PROCESS EVALUATION CHECKLIST DATE:

MIL-P-53030A 9 March 1992 SUPERSEDING MIL-P-53030 7 December ...

MIL-C-81706 MIL-T-81772 MIL-H-83282 STANDARDS FEDERAL FED-STD-141 FED-STD-313 FED-STD-595 MILITARY MIL-STD-105 ... qualified for inclusion in the applicable Qualified Products List whether or not such products have actually been so listed by that date.

-. CUSTOMER P.O. NO. DATE -NO. 12-18-06 PAGE 1521 FAX

qpl- 1-157 qpl -22-70 qpl-94-101 qpl 151 09-39 qpl-28876-31 ntc 2 to ms 15535k ntc 2 to ms 16563b ntc 3 to ms 51073a ntc 1 to: mil-hdbk-1011/2 ... di-qcic-81706 di-qcic-81 707 di-qcic-81708 di-misc-81709 di-misc-8" 71 0 di-tmss-81711 - title

MEW DOCUMENTS

qpl-46058--87 chg ntc ' 70: qpi-81706- 16 ntc 'i to: mil-drl'll--581 5/1 a n'i'c 3 to: mil-f- 24044/2 ntc 1 'tor-a 59310 1 'to a-a-59743 ntc 2 to an 105701 thrii 105800--4 ntc 2 to an 1058g1 tfirtj 1 (1 5 9 9 0 - 3 ntc 2 to ...

NAVAIR Corrosion Overview 2009 Air Force Corrosion Conference

• 4 QPL products currently identified and testing in work (5th to be tested) •Cleaning Efficiency •Hydrogen Embrittlement •Corrosion Testing •Storage Stability (1 & 2 year extended) •Pump Bottles, 5 gal pail, 55 gal drum. 15 ... DTL-81706 Type II

13 March 1980 PERFORMANCE SPECIFICATION - WBDG - The Whole ...

applicable qualified products list before contract award (see 4.3 and 6.3). 3.2 Material . ... conforming to MIL-C-81706 Class 1A to produce coatings conforming to MIL-C-5541, shall be configured to produce test assemblies as shown on figure 2.

10P20-44MNF

Qualified Product List The complete AkzoNobel Aerospace Coatings qualified product list (QPL) can be found at: www.akzonobel.com/aerospace Surface Conditions Surface pretreatment is an essential part of the painting process. ... MIL-C-81706) - Metaflex® SP 1050 ...

Qpl 81706 PDF

Related Qpl 81706 files

Latest PDF Files